Автор Тема: Дървен сайдинг vs Сайдинг от WPC  (Прочетена 44522 пъти)

dodo2

  • Hero Member
  • *****
  • Публикации: 3737
  • Карма: +191/-16
  • Респект: +310
    • Профил
Дървен сайдинг vs Сайдинг от WPC
« -: 14 Май, 2010, 17:03:09 »
0
Какви са плюсовете и минусите, как да избера?

(А също и за настилка - тераси и около басейн)

bate dimo

  • Ентусиаст
  • *
  • Публикации: 11
  • Карма: +0/-1
  • Респект: -1
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #1 -: 15 Май, 2010, 18:44:18 »
0
естествения мятериал винаги е по красив, въпроса е дали може да си го позволиш. всичко опира до парите според мен, същото се отнася и за камъните :)

dodo2

  • Hero Member
  • *****
  • Публикации: 3737
  • Карма: +191/-16
  • Респект: +310
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #2 -: 15 Май, 2010, 18:49:19 »
0
Има WPC сайдинг и по 100 евро/м2, от истинско дърво е доста по-евтин?

Има ли вариант истинско дърво, което да не трябва да се лакира всяка година? За мен плюсът на WPC е че не трябва да се поддържа, минусът е че никой не казва като го напече слънцето дали не отделя разни отрови.

Boby

  • Full Member
  • ***
  • Публикации: 113
  • Карма: +4/-0
  • Респект: +5
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #3 -: 18 Май, 2010, 20:14:53 »
0
Май имаш предвид PVC (polivinilchloride) сайдинг. Аз преди търсех нещо подходящо защото отдолу може да се направи вентилируема фасада с каменна вата - едно вечно решение. Но няма нищо евтино с изключение на ПВЦ а то стои грозно и евтино :(
Трайното решение е керамични плочки но цените са от 100Е/м2 нагоре. А дървото трябва също да е трайно - тик например? Това ще е още по-скъпо. Забрави да лакираш, ще ти писне още на втората година. Не си навличай дявол на магаре, една къща и без това има много поддръжка и въртене покрай нея.

dodo2

  • Hero Member
  • *****
  • Публикации: 3737
  • Карма: +191/-16
  • Респект: +310
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #4 -: 18 Май, 2010, 20:31:55 »
0
Не, WPC - това в wood plastic composite. Дървени частици 60-70% смесени с пластмаса (полипропилен май най-често), външно изглежда като дърво. Ето пример:




dodo2

  • Hero Member
  • *****
  • Публикации: 3737
  • Карма: +191/-16
  • Респект: +310
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #5 -: 20 Май, 2010, 02:56:36 »
0
Wood-plastic composites need protection, too.

The primary advantage of wood-plastic composites (WPC) as a replacement for wood in outdoor applications like decking and railing is their low maintenance and relative weather-resistance. While in the early days of WPC decking, expectations were that the product would maintain a new appearance without any maintenance, this has not been entirely the case. Some WPC marketers have tried to present a more realistic "low maintenance" rather than "no maintenance" picture, promoting regular cleaning and noting that some color fade should be expected. At the same time, the industry is raising the bar on aesthetics, using various strategies to improve colorfastness and to protect against microbial growth, scratching, and food or grease stains.

Additives for Protecting WPC Appearance

One strategy for improving weathering and appearance is to use additives to protect the polymer and wood. Indeed, formulations with weatherable pigments and UV stabilizers are being used to minimize color fading. Weatherable, inorganic oxide pigments are typically used to color WPC. Polyolefin composite decking can use iron oxide-based pigments, while PVC composite decking uses the same complex inorganic colored pigments (CICPs) that are used in vinyl siding. "Color fade" in WPC does not typically come from degradation of the pigment. The primary cause of color fade is the natural lightening of any exposed wood in the composite. Since only the plastic portion--30% to 50%--of the composite is pigmented, whitening or graying of the wood portion exposed to sunlight causes the overall color to fade.

A secondary cause of color fade can be degradation of the polymer. Surface cracking in olefinic composites or yellowing or chalking in PVC composites can mute the original color richness. UV light stabilizers, including hindered amine light stabilizers (HALS) or UV absorbers, are typically used to help protect the polymer from UV degradation. Pigments can also absorb or reflect UV light to help protect the polymer from degradation. Newer infrared reflective pigments are being used to reduce heat buildup in the deck, which is useful for consumer comfort, helps prevent warping, and may also help slow degradation. While existing additive technology does help make a good WPC product, there is still plenty of room for improvement of color retention, agree industry experts.

Penn Color has been working with producers to obtain improved weathering performance without adding significant costs by adjusting the pigment type and percent loading. These new coloring packages have shown improvements in weathering by up to 30%, while adding only a few cents per linear foot of deck board, says Bob Kaminski, industry manager for thermoplastics at Penn Color. The company is also experimenting with stabilizing the wood portion to prevent it from lightening. Techniques are available for coloring the wood fibers separately, but at an added cost and process complexity, say others.

Americhem has spent two years developing improved colorant solutions for olefin-based WPC that are a combination of additive, pigment, and carrier-resin technologies. The target is composite color that weathers like vinyl siding, with no drastic color fade in the first year of exposure, notes Laura Prexta, technology manager for Building and Construction at Americhem. The improved master-batches are undergoing accelerated weather testing and outdoor exposure testing in commercially produced deck boards, with promising initial results, she reports. Accelerated testing in a weatherometer includes variables of moisture, temperature, and light, and is very useful for ranking samples exposed to the same conditions. Although it doesn't directly correlate to outdoor exposure, which has many more variables, accelerated testing can be used as an indicator.

Besides aiming for improved color retention in standard colors, WPC manufacturers have introduced more natural wood-grain finishes and darker colors that imitate tropical hardwoods. Darker colors seem to weather better than lighter colors--although lab tests show a similar shift in color measurement numbers, the visual appearance of darker samples is better, notes Penn Color's Kaminski.

Although manufacturers note that decking should be washed periodically to remove dirt, which helps prevent mold stains, biocidal additives to minimize mold growth are also increasing in use. Visible mold stains on decking are caused by surface mold fungi that grow if given the right conditions of temperature, moisture level, and food source, such as exposed wood or dirt on the deck surface. In addition, decay fungi can grow if moisture contents are above 25%. While lab test methods show low composite moisture contents around 4%, field tests have recently shown much higher moisture contents near the surface and ends of boards--in some cases above 25% moisture content, notes Mark Manning, manager of preservation technology at U.S. Borax (Rio Tinto Minerals). Under these conditions, there is potential for decay fungi to grow on unprotected wood, he warns. Broad-spectrum biocides such as Vinyzene DCOIT-based formulations from Rohm and Haas reduce growth of surface fungi on both wood and plastic. Microban[R], a triclosan-type antimicrobial, is also being used. Borogard[R] ZB zinc borates from Rio Tinto Minerals act to both inhibit surface mold growth and preserve exposed wood from decay fungi. Borogard ZB is also reported to help reduce levels of UV degradation, particularly when used with hindered amine light stabilizers (HALS).

The improved performance brought by additives comes with added formulation expense. Teknor Color recently introduced TEK Deck Pro[TM] masterbatches, which combine pigments with UV absorbers and biocides, saving processors money by reducing additive-handling costs.

Encapsulating Exposed Wood During Compounding

The compounding process--coating the wood fiber with plastic and dispersing the wood, pigment, and additives throughout the plastic--can be key in obtaining improved aesthetics by encapsulating the wood fibers. Exposed wood at the composite surface will absorb grease or liquids like wine, causing stains that are difficult to remove. Unprotected wood also absorbs moisture, which can lead to microbial growth. Proper screw configuration is important for optimal mixing, notes Paul Andersen, director of process technology at Coperion Corp., which offers co-rotating twin-screw extruders for WPC extrusion. Drying of the wood component is also important, because excessive moisture can inhibit mixing and form an interface between the wood and polymer that inhibits encapsulation. Some extrusion system configurations use predried wood fibers, while others dry the wood component in the extruder prior to adding the polymer. Coperion supplies both configurations, and recently introduced a new easy-to-install side vent designed to minimize particle entrainment.

Additives play a role in compounding. Both lubricants and coupling agents aid in dispersing pigments and wetting-out wood fiber, which promotes uniform color and weathering. Coupling agents also help bond the polar wood with the nonpolar polymer. Coupling agents improve strength properties, as well as improving encapsulation and reducing moisture absorption, which helps prevent mold growth. Maleated polyolefins are the most common coupling agent used in WPC. Chemtura introduced a nondusting powder form of its Polybond[R] 3029 maleic anhydride-grafted PE coupling agent for PE composites. Polybond[R] 3039 powder is useful for WPC manufacturers who blend powdered additives prior to feeding to a counter-rotating twin-screw extruder. DuPont[TM] Fusabond[R] W PC-576D incorporates anhydride functional groups as a copolymer, giving improved performance at low additive levels. Although traditional metallic stearate lubricants are known to interfere with maleic anhydride coupling agents, non-interfering lubricants are available for these formulations. Dyneon has tested a polymeric additive that provides both lubricant and coupling properties through functional groups tuned to go to the interface of the wood and polymer. In accelerated and outdoor weathering tests, these developmental controlled-architecture materials (CAM) reduce color fade and moisture absorption, and improve retention of physical properties after weathering.

Some WPC lumber manufacturers point to their compounding techniques for improved weathering. Advanced Environmental Recycling Technologies (AERT) says that the process for their MoistureShield[R] professional grade decking heats and pretreats the wood fiber prior to extrusion and provides "total encapsulation" of the wood fiber. This makes the boards "virtually moisture-proof," minimizing the need for preservatives. Composatron Composite Technology uses Strandex technology to encase strands of wood flour in plastic, which, the company says, results in significantly less color fade and reduces water absorption.

Protective Coextrusions and Coatings

Other manufacturers have introduced products with a coextruded polymer cap or coating on the wood-plastic composite. The capstock protects the wood from the environment, preventing it from absorbing moisture and stains. For example, Correct Building Products coextrudes a coating of PP containing UV, scratch, stain-resistant, and antimicrobial additives over the PP-wood fiber composite using a patent-pending process for their CorrectDeck CX product. While the core of the board does contain antioxidants and UV stabilizers, putting higher levels of additives only in the surface layer makes it a more affordable solution. Composatron uses an ASA (acrylonitrile-styrene-acrylate) coextruded capstock for its Premier[TM] railing products. ASA is inherently more weather-resistant than polyolefins, and can also hold darker pigments. Royal Crown Limited also puts a protective cap layer on its Harmony Select[TM] decking, introduced in 2005 and made with Celucor[TM], a composite of natural fibers encapsulated with cellular PVC. CertainTeed's Panorama PVC capped composite, introduced in 2005 for railings, replicates a painted wood look with good weather resistance and the handling and feel of wood, says product compliance engineer Neil Sexton.

Rohm and Haas is experimenting with acrylic-based polymers for thin coatings to be applied to deck boards after extrusion. The primary goal for the coating would be short-term scuff, stain, and bacterial resistance to protect boards during transport to the building site, although longer-term protection is a possibility. Rohm and Haas is also looking at acrylic-based polymers for solid color and semi-transparent stains for after-market use on WPC decks. This would allow consumers to restain their composite deck like a wood deck. One difficulty is in finding a coating that will adhere to all the different resins used in composite decks, notes Michelle Toth, technical group leader for WPC at Rohm and Haas.

Advanced Environmental Recycling

Technologies, Inc. (AERT)

+1 800-951-5117

www.aertinc.com

Americhem

+1 800-228-3476

www.americhem.com

Borax (Rio Tinto Minerals)

+1 661-287-5400

www.borax.com

CertainTeed

+1 517-780-3185

www.certainteed.com

Chemtura

+1 203-573-2000

www.chemtura.com

Composatron

+1 416-335-6500

www.composatron.com

Composite Lumber Manufacturers Association

+1 202-207-0906

www.compositelumber.org

Coperion Corp.

www.coperion.com

Correct Building Products

+1 877-332-5877

www.correctdeck.com

DuPont Industrial Polymers

+1 302-774-1000

www.dupont.com/industrial-polymers/woodalternatives

Dyneon

+ 1 800-810-8499

www.dyneon.com

Penn Color

+1 866-617-7366

www.penncolor.com

Principia Partners

+1 800-378-8330

www.principiaconsulting.com

Rohm & Haas

+1 800-356-3402

www.rohmhaas.com

Royal Crown Limited

+1 800-488-5245

www.royalcrownltd.com

Teknor Apex Co.

+1 401-725-8000

www.teknorapex.com

Trex Co.

+1 800-289-8739

www.trex.com

markk

  • Ентусиаст
  • *
  • Публикации: 10
  • Карма: +6/-0
  • Респект: +2
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #6 -: 20 Май, 2010, 19:41:13 »
0
Dodo 2,сайдинга е добър и за разлика от други не изисква поддръжка.
Разнасям такава мостра в багажника-искат да ме правят дистрибутор,но аз се дърпам... :)
Въпреки това,с чиста съвест мога да го препоръчам.

П.п.-Радвам се ,че и в този форум има подраздел "Строителство"...
Ейййй,много алкохолни емотикони бре... *drink2*
Ако не знаеш-питай.Ако знаеш-пак.От питане глава не боли,но от избързване-много.... :)

dodo2

  • Hero Member
  • *****
  • Публикации: 3737
  • Карма: +191/-16
  • Респект: +310
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #7 -: 20 Май, 2010, 20:20:23 »
0
markk :) А каква е цената на твоето? Видях, че Rehau вече имат такива.

И още един въпрос ме човърка - дават му живот примерно 20 години. След 20 години какво става? Предполагам просто ще е избеляло, но няма да се разпадне :)

А и трето - ако една цяла къща или поне голяма част от нея + тераси се облицива с такова, като го напече слънцето отделя ли някакви отрови? Това е дост голяма площ да не се окаже вредно... четох че се отделя формалдехид от пластмасите.

markk

  • Ентусиаст
  • *
  • Публикации: 10
  • Карма: +6/-0
  • Респект: +2
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #8 -: 20 Май, 2010, 20:30:24 »
0
Dodo 2,най-добре е да видиш това http://www.darvolex.com/front/index.php -нищо повече не мога да кажа засега.
Сайдинга все още е сравнително нов и нямам кой знае какви наблюдения-харесва ми като здравина и система..
Ако не знаеш-питай.Ако знаеш-пак.От питане глава не боли,но от избързване-много.... :)

markk

  • Ентусиаст
  • *
  • Публикации: 10
  • Карма: +6/-0
  • Респект: +2
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #9 -: 20 Май, 2010, 20:44:37 »
0
Колкото до цената-дават ми за цялата система(използването на която не е задължително) цена от 66лв/м2 като за техен представител-гледам,че на разни места се предлага значително по-скъпо.
Подходящо е да се използва на фасади,по които не е правено нищо,за да е икономически ефективно-тоест искам да кажа,че  ако,да речем,фасадата е на тухла,можеш да монтираш в системата топлоизолационни плоскости(EPS,XPS,вата),като същевременно,в сравнение със стандартна топлоизолационна система, спестиш от операциите дюбелиране,шпакловане ,мазилка..
Ако не знаеш-питай.Ако знаеш-пак.От питане глава не боли,но от избързване-много.... :)

dodo2

  • Hero Member
  • *****
  • Публикации: 3737
  • Карма: +191/-16
  • Респект: +310
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #10 -: 20 Май, 2010, 22:57:57 »
0
Мога да кажа, защо ме вълнуват трите теми, които съм напускал тук: измислям си къща (без да бързам) и от това което съм чел в другия форум ми се заформя така: стените от бъркоча на Фло, колкото е необходимо дебели, отвън такъв сайдинг (на някои части - изкуствен камък), отвътре никакво измазване, само грунд ако е необходимо и хубава боя. Хем ще излезе по-евтино, хем повече ще ми харесва (омръзнаха ми гладки стени).
Според теб така става ли или ще трябва някакво измазване поне отвън за защита?
 *drink5*

markk

  • Ентусиаст
  • *
  • Публикации: 10
  • Карма: +6/-0
  • Респект: +2
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #11 -: 20 Май, 2010, 23:32:37 »
0
Много сме писали в другия форум,но все пак-първото и най-важно условие е конструкцията на къщата да не е преоразмерена,т.е. да е проектирано за такъв вид строителство.
Не е необходимо измазване(не разбрах каква точно защита имаш предвид) при положение,че под сайдинга може да се сложи всякаква(термо,звуко,влаго,пожаро,хидро и т.н.) изолация.
Съвсем друг е въпроса какъв процент от цялата сума на завършеното строителство представляват отделните елементи от него и какво точно от тях би могло да се оптимизира или  спести,без да се нарушава комфорта на обитаване.
Нямаш представа колко би се спестило дори и от едно съвсем конвенционално съвременно строителство,ако самия строител е ангажиран от самото начало в проектирането и впоследствие с цялостното реализиране на проекта-за разлика от масовата практика един да проектира,друг да прави грубия строеж,трети ,четвърти и N-ти да се ангажират за довършителните работи,което в комбинация с неориентиран(той не е и длъжен да е) инвеститор или възложител води до един куп недомислия,които в крайна сметка плаща именно собственика.
Ако не знаеш-питай.Ако знаеш-пак.От питане глава не боли,но от избързване-много.... :)

TOPTKO

  • Jr. Member
  • **
  • Публикации: 68
  • Карма: +2/-0
  • Респект: +8
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #12 -: 28 Юни, 2010, 20:51:50 »
0
На никои не препоръчвам дървен сайдинг, иска си грижи и подръжка.
Това е кедър на 2 години грозно потъмнял и изкорубен

А без подъжка ще заприлича на това


Затова земи си от онея плоскости дето ги покозваш на снимката.

dodo2

  • Hero Member
  • *****
  • Публикации: 3737
  • Карма: +191/-16
  • Респект: +310
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #13 -: 28 Юни, 2010, 20:58:41 »
0
Има даже изкуствени камъни, наподобяващи точно изгнило дърво, на мен твоите снимки ми харесват. Съчетание на такова с перфектни дограми ще е интересно. Но от друга страна гниенето е свързано и с всякакви плесени, животни и т.н. Т.е. ако дървото само визуално се скапваше без да завъжда фауна за мен е ОК, но май няма как да стане..

Ето изкуствен камък:


dodo2

  • Hero Member
  • *****
  • Публикации: 3737
  • Карма: +191/-16
  • Респект: +310
    • Профил
Re: Дървен сайдинг vs Сайдинг от WPC
« Отговор #14 -: 20 Септември, 2012, 21:01:51 »
0
goro, знаеш ли гръцки производител на WPC настилка? Такава: